Apraksts
Manufacturer's code:
10090182
Hillvert soil moisture sensor it is suitable for monitoring its level so that the automatic watering system driver can stop watering when it is too wet. The device matches most irrigation controllers, especially the Hillvert models with the serial numbers 10090184, 10090187 and 10090188. On the meter one of the
three soil moisture levels When its actual level is higher than set, the sensor sends a signal to the controller to turn off the irrigation cycle.
every 60 sThe cable to be connected to the driver is weather resistant.
LED control units The desired moisture level is selected by the appropriate button, which signals the light of the LED. If no changes are made within a minute, the control will be extinguished by saving the setting.
Product features: - - Universality - three different humidity levels - 25%, 45%, 60%,
- - Productivity - water saving and protection of plants against excessive watering,
- - Precision - measurement every 60 s,
- - Durability - weather resistant, suitable also for outdoor use,
- - Easy to operate - three buttons and LEDs indicating the settings.
Technical parameters: - - Model - HT-IRI-02
- - Manufacturer's code - 10090182
- - Status of product - New
- - Power cord [m] - 5
- - Material - PP
- - Watering duration regulation - N/A
- - Output plugin - Mini jack slot
- - Time setting [min] - N/A
- - Working mode - S = 25%, M = 45%, L = 60% (volume index)
- - Watering frequency control - N/A
- - Power source - 2 x AA 3 V
- - Gwint - N/A
- - IP protection - IP66
- - Periodical measurement frequency [s] - 60
- - Dimensions (DxSxW) [cm] - 10 x 8 x 13
- - Weight [kg] - 0,2
- - Dimensions of dispatch (DxSxW) [cm] - 11 x 9 x 15
- - Weight of dispatch [kg] - 0,22
Included: - - Soil humidity sensor
- - User manual
